英国原装进口斯坦福无刷电机输出电压调节器AS440并网电流补偿
产品名称:sx440 avr,as440 avk,
原厂编号:e000-24038;e000-24030;
常用名:斯坦福电机稳压板,斯坦福稳压板,stamford sx440,
并机稳压板,
全新进口原厂原包装,现货。此款另有副厂链接为:http://detail.china.alibaba.com/buyer/offerdetail/586222480.html?asker=atc
本产品为英国斯坦福发电机专用avr,适用于英国斯坦福或国内无刷发电机组,功率范围广泛,从200kw-1220kw的发电机组均可适用。
电压建立:当剩磁大于4v25hz时自动建压
输入电源:ac 180~260v 50/60hz
输出电压:63v dcZui大(当输入ac 207v时)
电 流:4a(连续) 6a10s(瞬间)
频率补偿:内置发动机转数下降时输出电压随之下降的频率保护电路
调 整 率:优于1%。
原厂数据(部分说明):
1. introduction
sensing input
voltage: 190 ~ 264 vac, 1 phase 2 wire
frequency:50 / 60 hz, selectable
output
voltage: max. 90 vdc @ 207 vac
current: continuous 4a
intermittent 10a for 10 sec.
resistance: min. 15 ohm
voltage regulation
< ± 1% ( with 4% engine governing )
voltage build-up
residual voltage at avr terminal > 5 vac
thermal drift
0.05% per °c change in avr ambient
external volts adjustment
±8% with 1k ohm 1 watt trimmer
unit power dissipation
max. 12 watt
under frequency protection
set point 95% hz
( ufro )
slope 170% down to 30 hz
soft start ramp time
2 sec.
analogue input
max. input ± 5 vdc
sensitivity 1v for 5% generator volts
input resistance 1k ohm
droop input
burden 10 ohm
max sensitivity 0.07 a for 5% droop (pf=0)
max. input 0.33 a
dimensions
150mm l * 135mm w * 40mm h
weight
418g ± 2%
2. wiring
1. k1,k2 : field input external switch terminals.
linked for normal operation.
2. p2,p3 : external power input terminals.
3. 3,2 : sensing input terminals.
4. 1,2 : external vr terminals. linked for useless.
5. x,xx : x connect to field (+), xx connect to field (-).
6. s1,s2 : droop ct input terminal.
7. a1,a2 : var/pf controller input.
8. a,b,c : link a,c for under 90kw.
link b,c for 90 ~ 550kw.
link a,b for over 550kw.
9. j1~j8 : jump select terminals, 2-3,4-5,6-7.
please refer to figure 2 and figure 3.
3. adjustment
3.1 voltage adjustment
the generator output voltage can be altered by
adjustment of the volt vr on the avr board, or by
the external trimmer (1kw) if fitted.
1. the terminals 1&2 must be linked if no hand
trimmer.
2. before start the generator, please turn the volt
trimmer on the avr board fully anticlockwise
turn the external trimmer to midway position.
3. turn the stability trimmer on the avr board to
midway position.
4. connect a voltmeter to generator output voltage
terminals.
5. start generator set and run on no load at nominal
frequency 50 ~ 53hz or 60~63hz.
6. if the red led is illuminated, refer to the under
frequency roll off adjustment.
7. carefully turn volt trimmer clockwise until rated
voltage is reached.
本产品的加工定制是是,品牌是Stanford/斯坦福,型号是AS440,E000-24038,产品认证是UL,CE
联系方式
- 地址:东莞 东莞市东城区主山社区前进四巷5号
- 邮编:523400
- 电话:(0769)
- 经理:熊永红
- 手机:13925851050
- 传真:86 0769 83239660
- QQ:2853513080
- Email:2853513080@qq.com